글로벌 히트 수축 튜빙 시장 규모, 점유율 및 추세 분석 보고서 – 산업 개요 및 2031년까지의 예측

열 수축 튜빙 시장 분석

글로벌 열 수축 튜빙 시장은 전자, 자동차, 항공우주 및 통신과 같은 산업 전반에 걸쳐 광범위하게 적용되어 상당한 성장을 경험하고 있습니다. 이 튜빙은 전선, 커넥터 및 기타 구성 요소에 대한 절연, 환경 보호 및 스트레인 릴리프를 제공하여 습기, 화학 물질 및 마모로부터 보호하는 능력으로 평가됩니다. 중국이 이끄는 아시아 태평양 지역은 높은 제조 능력과 가전 제품 및 자동차 산업의 수요로 인해 시장의 상당 부분을 차지합니다. 북미와 유럽도 상당한 기여자이며, 수요는 첨단 인프라 및 기술 요구 사항에 의해 주도됩니다. 그러나 원자재 가격의 변동과 대체 절연 방법의 경쟁은 지속적인 성장에 과제를 제시합니다. 미래 트렌드는 엄격한 산업 표준을 충족하는 친환경 소재와 고성능 튜빙에 집중되어 시장 내에서 새로운 기회를 창출할 가능성이 높습니다.

열 수축 튜빙 시장 규모

글로벌 열 수축 튜빙 시장 규모는 2023년에 20억 5천만 달러로 평가되었으며, 2031년까지 33억 달러에 도달할 것으로 예상되며, 2024년에서 2031년까지의 예측 기간 동안 CAGR은 6.10%입니다. Data Bridge Market Research 팀이 큐레이팅한 시장 보고서에는 시장 가치, 성장률, 시장 세그먼트, 지리적 범위, 시장 참여자, 시장 시나리오와 같은 시장 통찰력 외에도 심층적인 전문가 분석, 수입/수출 분석, 가격 분석, 생산 소비 분석, 페슬 분석이 포함되어 있습니다.

열 수축 튜빙 시장 동향

“친환경, 할로겐 프리 열수축 튜브로의 전환 증가”

글로벌 열 수축 튜빙 시장은 자동차, 전자, 통신과 같은 산업 전반에 걸쳐 견고한 단열 솔루션에 대한 수요가 증가함에 따라 성장하고 있습니다. 이 시장을 주도하는 주요 추세는 강화된 환경 규정과 기업의 지속 가능성 목표에 따라 친환경적이고 할로겐이 없는 열 수축 튜빙으로의 전환입니다. 예를 들어, 전기 자동차(EV) 제조업체는 화재 시 독성 배출을 줄이는 동시에 내화성을 보장하기 위해 할로겐이 없는 튜빙을 점점 더 많이 채택하고 있어 안전과 지속 가능성을 모두 향상시키고 있습니다. 열 수축 튜빙은 와이어 내구성과 성능을 향상시키는 보호적이고 공간 절약적인 단열을 제공하며, 특히 고응력, 고온 환경에서 유용합니다. EV와 첨단 전자 제품의 등장으로 이 튜빙 솔루션은 자동차 배터리 시스템과 같은 환경에서 중요한 습기, 마모 및 화학 물질 노출로부터 보호하는 데 광범위하게 사용되고 있습니다. 산업이 환경 영향을 최소화하는 데 중점을 두면서 친환경 열 수축 튜빙에 대한 수요는 앞으로 몇 년 동안 더욱 확대될 것으로 예상됩니다.

보고서 범위 및 열 수축 튜빙 시장 세분화 

Heat Shrink Tubing Market Definition

Heat shrink tubing is a plastic-based, cylindrical tubing material that shrinks in diameter when exposed to heat. Typically made from polyolefin, PVC, or other thermoplastics, it provides insulation, protection, and strain relief for wires, cables, and connectors. Heat shrink tubing is commonly used to protect against moisture, dust, abrasion, and chemicals, and it can bundle multiple wires for a streamlined, durable assembly.

Heat Shrink Tubing Market Dynamics

Drivers

• Increasing Government's Role in Supporting and Expanding Transmission and Distribution Systems

The electric power transmission and distribution (T&D) system serves as a crucial link between generating stations and consumers, and its efficiency is becoming increasingly important due to growing electricity demands and the stresses posed by aging infrastructure, which elevate the risk of widespread blackouts. In today’s society, reliable and cost-effective electricity delivery is essential. The U.S. T&D landscape includes various economic drivers, organizational frameworks, technologies, and regulatory oversight from federal, municipal, state, and customer-owned cooperatives. Notably, around 80 percent of power transactions take place over lines owned by investor-owned regulated utilities (IOUs), which are fully integrated entities controlling both generation and distribution systems. While this model has historically dominated the sector, the advent of deregulation in certain states has altered the landscape, allowing for the separation of transmission, generation, and distribution responsibilities among different entities. This evolving structure is driving the need for effective insulation solutions such as heat shrink tubing, which are essential for enhancing the reliability and safety of power delivery systems amidst these challenges.

• Growing Global Power Generation Capacity

The production of heat shrink tubing involves a two-step process, beginning with standard extrusion followed by a proprietary secondary process that renders the tubing heat-shrinkable. While the specific details of this secondary process remain confidential, it typically employs heat and force to expand the tubing's diameter, which is then cooled to room temperature. If the tubing is rigid, it will revert to its original size upon heating. This technology is crucial in the context of upgrading transmission lines and substations, which presents a cost-effective strategy to enhance transmission capacity. By reconducting existing lines with advanced materials, such as composite conductors capable of carrying higher currents, utilities can significantly boost their capacity without the need for extensive new infrastructure. This trend emphasizes the driving the demand for heat shrink tubing, as it is essential for ensuring reliable and efficient connections in modernized electrical systems.

Opportunities

• Increasing Expansion of Telecommunications Infrastructure

The ongoing expansion of telecommunications infrastructure, especially with the global rollout of 5G technology, presents a significant market opportunity for heat shrink tubing due to its critical role in providing robust insulation and protection for sensitive electronic components. As telecommunications networks evolve to support faster data speeds and increased connectivity, the demand for high-quality insulation materials becomes paramount to ensure system reliability and longevity. For instance, a single 5G base station can involve numerous cables and connectors that require effective protection from environmental factors and mechanical stress, highlighting the essential role of heat shrink tubing in these installations. With the push towards advanced telecommunications solutions, the demand for heat shrink tubing is set to rise, positioning it as a vital component in supporting the infrastructure needed for next-generation communication technologies.

• Increasing Demand in the Electronics and Electrical Industries

The increasing demand for heat shrink tubing in the electronics and electrical industries represents a significant market opportunity, driven by the growing need for effective insulation and protection in applications such as wiring harnesses and connectors. As consumer electronics become more compact and complex, manufacturers require reliable solutions that can withstand environmental stressors while maintaining performance. For instance, the automotive sector, with the rise of electric vehicles (EVs), has seen a surge in wiring complexity, often utilizing hundreds of connectors and harnesses that need to be insulated against heat, moisture, and abrasion. The increasing demand for heat shrink tubing in the electronics and electrical industries represents a significant market opportunity, driven by the growing need for effective insulation and protection in applications such as wiring harnesses and connectors. As consumer electronics become more compact and complex, manufacturers require reliable solutions that can withstand environmental stressors while maintaining performance. For instance, the automotive sector, with the rise of electric vehicles (EVs), has seen a surge in wiring complexity, often utilizing hundreds of connectors and harnesses that need to be insulated against heat, moisture, and abrasion.

Restraints/Challenges

• Government Regulation on Toxic Gas Emissions

The environmental impact of rapid industrialization has led to widespread contamination of air, land, and water resources with toxic materials and pollutants, posing serious health risks to both humans and ecosystems. Increased and intensive use of materials and energy has exerted cumulative pressure on the quality of local, regional, and global ecosystems. Historically, environmental management was characterized by a laissez-faire approach, with minimal restrictions on pollution and waste disposal, focusing primarily on short-term nuisance avoidance. Remediation was only addressed in exceptional cases where damage was deemed unacceptable. However, as industrial activity has escalated and awareness of cumulative effects has increased, a pollution control paradigm has emerged as the prevailing method of environmental management. This shift presents a significant market challenge, as industries must navigate stricter regulations and the growing demand for sustainable practices to mitigate their environmental impact.

• Increasing Raw Material Costs for Tubing

Price fluctuations in raw materials significantly impact the procurement of cable, wire, and connectivity products, influencing budget projections in finance, supply chain management, and product development. With the surge in industrial production and robust sustainable energy initiatives, China has become the largest consumer of copper globally. Countries such as Europe, the U.S., and China are aggressively pursuing renewable energy strategies to promote greener economies, and copper's exceptional thermal and electrical conductivity is essential for achieving these goals. However, leading copper-producing nations, including Chile, Peru, China, and the United States, are struggling to meet the soaring demand associated with these green initiatives, driving copper prices to unprecedented levels. Additionally, speculation suggests that as the U.S. dollar weakens against other global currencies, users of those currencies may find their purchasing power for copper and other commodities increasing. This situation presents a significant market challenge for businesses reliant on these materials, as rising costs can affect profitability and project feasibility.

This market report provides details of new recent developments, trade regulations, import-export analysis, production analysis, value chain optimization, market share, impact of domestic and localized market players, analyses opportunities in terms of emerging revenue pockets, changes in market regulations, strategic market growth analysis, market size, category market growths, application niches and dominance, product approvals, product launches, geographic expansions, technological innovations in the market. To gain more info on the market contact Data Bridge Market Research for an Analyst Brief, our team will help you take an informed market decision to achieve market growth.

Heat Shrink Tubing Market Scope

The market is segmented on the basis of type, product type, voltage, shrink ratio, material, and end user. The growth amongst these segments will help you analyze meagre growth segments in the industries and provide the users with a valuable market overview and market insights to help them make strategic decisions for identifying core market applications.

Type

• Single Wall
• Dual Wall

Product Type

• Spools
• Pre-Cut Length
• Others

Voltage

• Low
• Medium
• High

Shrink Ratio

• 2:1
• 3:1
• 4:1
• 6:1
• Others

Material

• Polyolefin
• Perfluoroalkoxy Alkanes (PFA)
• Polytetrafluoroethylene (PTFE)
• Ethylene Tetra Fluoro Ethylene (ETFE)
• Fluorinated Ethylene Propylene (FEP)
• Polyetheretherketone (PEEK)
• Others

End User

• Utilities
• IT and Telecommunication
• Automotive
• Electronics
• Aerospace
• Healthcare
• Oil and Gas
• Marine
• Food and Beverages
• Construction
• Chemical
• Others

Heat Shrink Tubing Market Regional Analysis

The market is analyzed and market size insights and trends are provided by type, product type, voltage, shrink ratio, material, and end user as referenced above.

The countries covered in the market report are U.S., Canada, Mexico in North America, Germany, Sweden, Poland, Denmark, Italy, U.K., France, Spain, Netherland, Belgium, Switzerland, Turkey, Russia, Rest of Europe in Europe, Japan, China, India, South Korea, New Zealand, Vietnam, Australia, Singapore, Malaysia, Thailand, Indonesia, Philippines, Rest of Asia-Pacific (APAC) in Asia-Pacific (APAC), Brazil, Argentina, Rest of South America as a part of South America, U.A.E, Saudi Arabia, Oman, Qatar, Kuwait, South Africa, Rest of Middle East and Africa (MEA) as a part of Middle East and Africa (MEA).

Asia-Pacific is anticipated to lead the global heat shrink tubing market, with China at the forefront due to its role as a major consumer hub with a robust GDP. China’s dominance is further supported by the presence of significant industry players, which strengthens its market position and drives substantial demand for heat shrink tubing. This economic strength and concentrated industry presence make China a pivotal market within the region and globally, solidifying Asia-Pacific’s prominent role in the market’s expansion.

The country section of the report also provides individual market impacting factors and changes in market regulation that impact the current and future trends of the market. Data points such as down-stream and upstream value chain analysis, technical trends and porter's five forces analysis, case studies are some of the pointers used to forecast the market scenario for individual countries. Also, the presence and availability of global brands and their challenges faced due to large or scarce competition from local and domestic brands, impact of domestic tariffs and trade routes are considered while providing forecast analysis of the country data.

Heat Shrink Tubing Market Share

시장 경쟁 구도는 경쟁자별 세부 정보를 제공합니다. 포함된 세부 정보는 회사 개요, 회사 재무, 창출된 수익, 시장 잠재력, 연구 개발 투자, 새로운 시장 이니셔티브, 글로벌 입지, 생산 현장 및 시설, 생산 용량, 회사의 강점과 약점, 제품 출시, 제품 폭과 범위, 애플리케이션 우세입니다. 위에 제공된 데이터 포인트는 시장과 관련된 회사의 초점에만 관련이 있습니다.

시장에서 운영되는 열 수축 튜빙 시장 리더는 다음과 같습니다.

• ABB(스위스)
• 스미토모 전기공업 주식회사(일본)
• TE 커넥티비티(스위스)
• Thermosleeve USA(미국)
• Techflex, Inc. (미국)
• 대성그룹(중국)
• 심천 워얼 열수축 소재 유한회사(중국)
• 후이저우 광하이 전자 절연 재료 유한회사(중국)
• 판듀이트(미국)
• 헬러만타이튼(독일)
• 알파 와이어(미국)
• 3M(미국)
• 쇼코(캐나다)
• 제우스 산업 제품 주식회사(미국)
• 몰렉스(미국)
• 펙스코(미국)
• 프리즈미안 그룹(이탈리아)
• GREMCO GmbH(독일)
• Qualtek Electronics Corp. (미국)
• 힐탑(영국)
• Dunbar Products, LLC. (미국)
• 창위안전자(동관)유한공사(중국)

히트 수축 튜빙 시장의 최신 개발

• 2024년 10월, 재료 전문 기업이자 박리형 열 수축 튜빙(PHST) 기술 분야의 선두 주자인 준코샤는 1.8:1 수축 비율의 반투명 PHST 솔루션의 6가지 새로운 크기를 출시했습니다. 이 추가 제품은 소형과 대형 모두의 확장된 크기 범위를 제공하며, 의료 기기 산업에서 혁신적이고 고객 중심적인 솔루션을 제공하려는 준코샤의 헌신을 반영합니다.
• 2024년 7월, Cortec은 첨단 필름 기술과 효과적인 부식 방지 기능을 결합한 제품인 VpCI-126 수축 필름을 출시했습니다. 다양한 금속의 녹, 변색, 얼룩, 흰 녹 및 산화를 방지하도록 설계된 이 수축 필름은 최대 5년간 보호 기능을 제공하고 제품 밀봉 프로세스를 간소화합니다.
• 2024년 2월 Medical Extrusion Technologies(MET)는 Chamfr.com 플랫폼에서 의료 기기 분야를 위한 30개 이상의 크기의 FEP 열 수축 튜빙을 출시했습니다. MET의 FEP 열 수축은 회복 후 제어된 신장 성장을 제공하도록 설계되었으며, 표준 10%에 비해 2%-5%의 신장이 가능하여 의료 기기 개발의 R&D 요구 사항을 특별히 충족합니다.
• 2023년 4월, TE Connectivity는 고전압 애플리케이션에 맞게 특별히 설계되어 전도성 구성 요소와 케이블에 전기 절연과 보호를 제공하는 새로운 EV Single Wall(EVSW) 튜빙을 출시했습니다. 이 제품은 단일 벽 튜브로, 전기 자동차의 고전압 구성 요소를 보호하는 데 중점을 둡니다. 이 혁신적인 솔루션을 제공함으로써 회사는 제품 포트폴리오를 다양화하고 EV 애플리케이션과 관련된 고유한 과제를 해결하는 것을 목표로 합니다.
• 3M은 2021년 4월 취약한 피부를 가진 사람들을 위한 의료 기기를 개선하기 위해 새로운 실리콘 접착제를 출시하여 혁신적이고 환자 중심의 의료 솔루션에 대한 노력을 강화했습니다.

SKU-55979