북미 열수축 튜빙 시장 – 2030년까지의 산업 동향 및 예측

북미 열수축 튜빙 시장 분석 및 규모

전 세계적으로 발전 용량이 증가함에 따라 북미 열 수축 튜빙 시장이 성장하고 있습니다. 그러나 기존 회랑을 따라 송전선과 변전소를 업그레이드하는 것은 송전 용량을 늘리는 비용 효율적인 방법입니다. 기존 회선을 재전도하여 송전 용량을 늘릴 수 있습니다(더 높은 전류를 전달할 수 있는 복합 도체와 같은 재료 사용). 이러한 재료는 현재 사용 가능하지만 새로운 재료를 재전도하기 위해 회선을 서비스에서 빼내기 어렵기 때문에 널리 사용되지 않습니다. 게다가 기상 조건이 좋을 때 모든 가공선은 정격 정격보다 높은 전류를 전달할 수 있으며 지속적으로 조정할 수 있는 실시간 정격은 사용 가능한 용량을 늘릴 것입니다.

Data Bridge Market Research는 북미 열수축 튜빙 시장이 2023년에서 2030년까지의 예측 기간 동안 6.2%의 CAGR로 성장할 것으로 예상되며 2030년까지 8억 5,814만 달러에 도달할 것으로 예상된다고 분석했습니다. 북미 열수축 튜빙 시장 보고서는 또한 가격 분석, 특허 분석 및 기술 발전을 포괄적으로 다룹니다.     

Market Definition

Heat shrink tubing is used to insulate wire providing abrasion resistance and environmental protection for the stranded solid wire conductors with connections, joints, and terminals in electrical work. In general, a tube with a lower shrink temperature will shrink faster. When heat shrink tubing is wrapped around wire arrays and electrical components, it collapses radially to fit the contours of the equipment, forming a protective layer.

Moreover, these tubings use various materials such as Perfluoroalkoxy alkanes (PFA), Polytetrafluoroethylene (PTFE), Fluorinated Ethylene Propylene (FEP), and others, to manufacture heat shrink tubings. The heat shrink tubings with different materials have different protection features against abrasion, low impact, cuts, moisture, and dust by covering individual wires or encasing entire arrays. In addition, material is decided based on end usage such as electronics, automotive, aerospace, and others. Plastic manufacturers begin by extruding a thermoplastic tube to create heat-shrink tubing. Heat shrink tubing materials vary depending on the intended application.

 North America Heat Shrink Tubing Market Dynamics

This section deals with understanding the market drivers, opportunities, restraints, and challenges. All of this is discussed in detail as below:

Drivers

• Role of Government in Supporting and Expansion of Transmission & Distribution Systems in the Heat Shrink Tubing Market Across the Region

The role of electric power transmission and distribution (T&D) plays an important link between generating stations and customers. Growing loads and stress created by the aging equipment and increasing the risk of widespread blackouts are a few of the factors which help generates the need for heat shrink tubes. Electricity delivery that is both dependable and cost-effective is critical in today's society. The U.S. transmission and distribution (T&D) is comprised of numerous economic drivers, organizational structures, technologies, and forms of regulatory oversight. Federal and municipal governments and state and customer-owned cooperatives are all part of these systems. However, about 80 percent of power transactions occur on lines owned by investor-owned regulated utilities (IOUs). These fully integrated utilities own both the generating plants and the transmission and distribution systems that deliver their customers' power. This was among the dominant model in the past but deregulation in some states has transformed the industry. Transmission, generation, and distribution may be handled by different entities in deregulated areas.

• Increase in the Capacity for Power Generation Across the Globe 

A two-step process is used to create heat shrink tubing. The first step is standard extrusion followed by a secondary process that makes the tubing heat-shrinkable. Although this secondary process's specifics are kept confidential, heat and force are used to expand the tubing's diameter. While still expanded, the tubing is cooled to room temperature. If the tubing is rigid, it is going to shrink down to its original size. The up-gradation of transmission lines and substations along existing corridors is a cost-effective way to increase transmission capacity. Existing lines can be reconducted to increase transmission capacity (using materials such as composite conductors that can carry higher currents).

Opportunity

• Wide Adoption of Heat Shrink Tubes in Various Industries

AI The heat shrink tubing products are made from uniquely formulated materials that have been enhanced by radiation cross-linking, a technology with product design that provides a repeatable, reliable, and shrink-to-fit installation compatible with many manufacturing processes. These products are in service throughout the world in automotive, telecommunications, power distribution, aerospace, defense, industrial and commercial applications. The tubing application in under bonnet cable protection, hoses, brake pipes, air conditioning, diesel injection clusters, connectors, inline splice, wire bundles, ring terminals, seat belt stalks, gas springs, antennas, and others are further enhancing the application capabilities in the automobile industry. The tubing products are made from uniquely formulated materials that have been enhanced by radiation cross-linking, a technology. The easy-to-use products provide cost-effective, proven solutions in various automotive applications, from sealing and protecting electrical splices to providing mechanical protection for fluid management systems in harsh surroundings.

Restraints/Challenges

• Government Regulation On the Emission of Toxic Gases

The environmental significance of rapid industrialization has brought about uncountable air, land, and water resource sites being contaminated with toxic materials and other pollutants, threatening humans and ecosystems with serious health risks. More extensive and intensive use of materials and energy has created cumulative pressures on the quality of local, regional, and North America ecosystems. Before there was a concerted effort to restrict the impact of pollution, environmental management extended little beyond laissez-faire tolerance, tempered by the disposal of wastes to avoid disruptive local nuisance conceived of in a short-term perspective. The need for remediation was recognized by exception in instances where damage was determined to be unacceptable. As the pace of industrial activity intensified and the understanding of cumulative effects grew, a pollution control paradigm became the dominant method of environmental management.

• Rising Prices of Raw Materials for Tubing

The price fluctuations affect the cable, wire, and connectivity products and materials being purchased or affect the outlook on budget projections in procurement, finance, supply chain management, or product development. Thanks to rising industrial production and aggressive sustainable energy initiatives, China is the world's largest consumer of copper. Europe, the U.S., and China pursue aggressive renewable energy initiatives to sustain greener economies and copper's high thermal and electric conductivity will help them get there. The largest copper-producing countries such as Chile, Peru, China, and the United States are struggling to meet the high demand for countries to meet their green economic initiative, contributing to the price of copper skyrocketing. There is also speculation that as the U.S. dollar weakens against other North America currencies, there will be more opportunities for users of other currencies to increase their purchasing power with copper and other commodities.

Recent Developments

• In April 2023, TE Connectivity announced the new EV Single Wall (EVSW) tubing specifically designed for high voltage applications and safely insulating and protecting conductive components and cables. This product is a single wall tube with the prime focus of providing electrical insulation and protection for high-voltage components in electric vehicles. This will help the company to diversify its product portfolio and meets the unique challenges of EV applications.
• In February 2023, Molex released a miniaturization report, stating expert insights and innovations in product design engineering and leading-edge connectivity. Through this miniaturization, the company has increased the effectiveness of products and their safety too. This development enhanced the company’s product line and it made a positive impact on the growth of the North America heat shrink tubing market.

North America Heat Shrink Tubing Market Scope

The North America heat shrink tubing market Scope is segmented into six notable segments based on the type, product type, material, voltage, shrink ratio, and end user. The growth amongst these segments will help you analyse meagre growth segments in the industries and provide the users with a valuable market overview and market insights to help them make strategic decisions for identifying core market applications.

Type

• Single Wall
• Dual Wall

On the basis of type, the North America heat shrink tubing market is segmented into single wall and dual wall.

Product Type

• Spools
• Pre-Cut Lengths
• Others

On the basis of product type, the North America heat shrink tubing market is segmented into spools, pre-cut lengths, and others.

Voltage

• Low
• Medium
• High

On the basis of voltage, the North America heat shrink tubing market is segmented into low, medium, and high.

Shrink Ratio

• 2:01
• 3:01
• 4:01
• 6:01
• Others

On the basis of shrink ratio, the North America heat shrink tubing market is segmented into 2:01, 3:01, 4:01, 6:01, and others.

Material

• Polyolefin
• 퍼플루오로알콕시알칸(PFA)
• 폴리테트라플루오로에틸렌(PTFE)
• 에틸렌테트라플루오로에틸렌(ETFE)
• 불소화에틸렌프로필렌(FEP)
• 폴리에테르에테르케톤(PEEK)
• 기타

북미 열 수축 튜빙 시장은 재료를 기준으로 폴리올레핀, 퍼플루오로알콕시알칸(PFA), 폴리테트라플루오로에틸렌(PTFE), 에틸렌테트라플루오로에틸렌(ETFE), 불화에틸렌프로필렌(FEP), 폴리에테르에테르케톤(PEEK) 및 기타로 구분됩니다.

최종 사용자

• 유용
• IT 및 통신
• 자동차
• 전자제품
• 항공우주
• 헬스케어
• 석유 및 가스
• 선박
• 음식과 음료
• 건설
• 화학적인
• 기타

북미 열 수축 튜빙 시장은 응용 분야별로 공익사업, IT 및 통신, 자동차, 전자, 항공우주, 헬스케어, 석유 및 가스, 해양, 식품 및 음료, 건설, 화학 및 기타로 구분됩니다.

북미 열수축 튜빙 시장 지역 분석/통찰력

북미 열수축 튜빙 시장을 분석하고, 위에 언급된 대로 유형, 제품 유형, 전압, 수축 비율, 재료 및 최종 사용자별로 시장 규모에 대한 통찰력과 추세를 제공합니다.

북미 열수축 튜브 시장 보고서에서 다루는 국가는 미국, 캐나다, 멕시코입니다.

미국은 이 지역의 첨단 소프트웨어 부문 덕분에 북미 지역을 주도하고 있습니다.

보고서의 지역 섹션은 또한 현재 및 미래 시장 추세에 영향을 미치는 개별 시장 영향 요인과 시장 규제의 변화를 제공합니다. 하류 및 상류 가치 사슬 분석, 기술 추세, 포터의 5가지 힘 분석, 사례 연구와 같은 데이터 포인트는 개별 국가의 시장 시나리오를 예측하는 데 사용되는 몇 가지 포인터입니다. 또한 북미 브랜드의 존재 및 가용성과 지역 및 국내 브랜드와의 대규모 또는 희소한 경쟁으로 인해 직면한 과제, 국내 관세의 영향 및 무역 경로가 지역 데이터의 예측 분석을 제공하는 동안 고려됩니다.   

경쟁 환경 및 북미 열수축 튜빙 시장 점유율 분석

북미 열수축 튜빙 시장 경쟁 구도는 경쟁자에 대한 세부 정보를 제공합니다. 회사 개요, 회사 재무, 창출된 수익, 시장 잠재력, 연구 개발 투자, 새로운 시장 이니셔티브, 북미 지역 입지, 생산 현장 및 시설, 생산 용량, 회사의 강점과 약점, 제품 출시, 제품 폭과 범위, 응용 분야 우세 등이 포함됩니다. 위에 제공된 데이터 포인트는 북미 열수축 튜빙 시장과 관련된 회사의 초점에만 관련이 있습니다.

북미 열수축 튜빙 시장의 주요 기업으로는 ABB(스위스), Sumitomo Electric Industries, Ltd.(일본), TE Connectivity(스위스), Thermosleeve USA(미국), Techflex, Inc.(미국), Dasheng Group(중국), Shenzhen Woer Heat - Shrinkable Material Co., Ltd.(중국), Huizhou Guanghai Electronic Insulation Materials Co.,Ltd.(중국), Panduit(미국), HellermannTyton(독일), Alpha Wire(미국), 3M(미국), SHAWCOR(캐나다), Zeus Industrial Products, Inc.(미국), Molex(미국), PEXCO(미국), Prysmain Group(이탈리아), GREMCO GmbH(독일), Qualtek Electronics Corp.(미국), Hilltop(영국), Dunbar Products, LLC.(미국), cygia, Changyuan Electronics(동관) Co., Ltd.(중국) 등이 있습니다.

SKU-63095