호주 방화 자재 시장 – 2029년까지의 산업 동향 및 예측

시장 분석 및 통찰력

호주 방화 자재 시장은 2022년부터 2029년까지의 예측 기간 동안 상당한 성장을 이룰 것으로 예상됩니다. Data Bridge Market Research는 시장이 2022년부터 2029년까지의 예측 기간 동안 5.2%의 CAGR로 성장하고 있으며 2029년까지 165,601.87천 달러에 도달할 것으로 분석합니다.

++

다양한 산업에서 방화재의 적용 범위를 확대하는 것은 호주 방화재 시장의 중요한 원동력이 될 것으로 예상됩니다. 유리한 정부 지침과 방화 안전 기준의 부과는 시장 성장을 가속화할 수 있습니다. 인구의 급속한 증가로 인한 건물 및 건설 활동의 증가는 호주 방화재 시장 성장을 더욱 이끌 것으로 예상됩니다.

호주 방화 자재 시장에 부정적인 영향을 미칠 수 있는 주요 제약 요인으로는 원자재 가격의 변동과 방화 솔루션과 사용자 인터페이스의 통합이 있습니다.

방화 시스템 및 제품의 급속한 기술 발전과 건물 내 거주자 및 사용자를 위한 안전 코드의 활용 증가는 호주 방화 자재 시장에 기회를 제공할 것으로 예상됩니다. 그러나 잠재적 최종 사용자 사이에서 인지 부족과 높은 설치 및 유지 관리 비용으로 인해 채택률이 낮아 호주 방화 자재 시장 성장에 어려움을 겪을 것으로 예상됩니다.

호주 방화 자재 시장 보고서는 시장 점유율, 새로운 개발 및 국내 및 지역 시장 참여자의 영향에 대한 세부 정보를 제공하고, 새로운 수익 창출처, 시장 규정의 변화, 제품 승인, 전략적 의사 결정, 제품 출시, 지리적 확장 및 시장의 기술 혁신 측면에서 기회를 분석합니다. 분석 및 시장 시나리오를 이해하려면 분석가 브리핑을 위해 저희에게 연락하세요. 저희 팀은 원하는 목표를 달성하기 위한 수익 영향 솔루션을 만드는 데 도움을 드릴 것입니다.

Market Definition

Fire protection materials are those materials that are used to ensure the safety of buildings from hazards related to fire. This involves using passive fire protection materials such as fire-resistant boards, sealants, and fire-resistant materials, such as mineral wool and fireproof coatings, or may include active fire protection materials such as fire extinguishing foams, chemicals, water, and sprays. When choosing a material that protects from fire, multiple factors are considered, such as its load-bearing capabilities, thermal conductivity, and tendency towards decay.

There is a growing demand for fire protection materials owing to stringent building codes & fire safety policies and various official standards established to overlook and ensure product effectiveness in the Australian region. This is expected to drive the fire protection materials over forecasted years. Moreover, the increasing awareness regarding protection from fire-related accidents among consumers is also expected to drive the growth of fire protection materials.

Australia Fire Protection Materials Market Dynamics

Drivers

• Escalating application scope of fire protection materials in various industries

Advanced fire protection materials are used in this vertical to avoid fire accidents. Highly efficient fire detection and prevention systems are required in this sector to prevent accidents. Clean agent fire suppression systems, dry chemical fire suppression materials, and water and foam sprinklers are extensively used in the mining sector.

Gas-based suppression systems containing CO2, Novec, and Inert gases and sprinkler systems are also used in the oil & gas sector. Additionally, rising applications of fire protection materials in mining vehicles to suppress fire by enhancing firefighting operation is also helping in the market growth.

• Imposition of favorable government guidelines and fire safety standards

Commercial construction is one of the growing application segments in the fire protection materials market, and the government has implemented strict safety regulations and strict building codes in the construction of offices, shopping centers, malls, hospitals, colleges, schools, universities, and hotels due to a large number of people in these buildings. Therefore, enforcement of these fire regulations and legislations will significantly increase awareness among the consumers, which may help to boost the demand for fire protection materials in the Australia fire protection materials market.

• Growing building and construction activities due to rapid growth in population

The engineering of a safety-proof structure is needed to ensure the stability of the structure and make fire and explosion risks manageable. Furthermore, the increase in the number of fire accidents, leading to the loss of life and valuable assets, has made various construction companies more vigilant, compelling them to employ fire protection measures for safety. This, in turn, is expected to boost the Australian fire protection materials market.

Opportunities

• Rapid technological advancements in fire protection systems and products

The advances that have occurred in improving the fire retardancy of specific materials have occurred, ranging from developments in phosphorus and halogen-free flame retardants to the use of nanocomposites as novel flame retardant systems. Thus, rapid technological advances in materials and fire protection systems may provide lucrative opportunities for the growth and development of the Australian fire protection materials market.

• Increasing utilization of safety codes in buildings for occupants and users

In addition, the Australian NCC also promotes low-combustible building materials and safe exit routes for occupants in well-designed fire compartments within buildings. All these specifications help set up the Fire resistance Level (FRL) of the buildings, ensuring structural adequacy, integrity, and proper insulation on the premises.

Thus, the increasing utilization and adoption of safety codes and protocols in various residential and commercial buildings for occupants and users are expected to offer growth opportunities to investors and players operating in the Australia fire protection materials market.

Restraints/Challenges

• Fluctuations in the price of raw materials

Higher raw material prices increase production costs at the company level. This, in turn, affects the consumers as the finished products cost more to the consumers, therefore, limiting their demand as consumers either stop the consumption of such costly products and materials or start looking for alternatives available in the market.

In addition, the increase in the price of various raw materials such as steel, concrete, and glass has directly and negatively affected the realty market, which may hinder the growth of the Australia fire protection materials market. Therefore, fast fluctuating and increasing raw material prices are expected to hinder the market's growth.

• Integration of user interfaces with fire protection solutions

Proper coordination between the mechanical, electrical, fire protection, and installing contractors is a must for the proper functioning of the fire control systems. In addition, with the integration of all security and fire systems in one place, the user interface becomes too confusing and complex to use.

The first time many operators interact with the control panel of this user interface is in times of uncertainty or an emergency. The more complex the user interface is, the more difficult its operation. Complex menu systems can easily lead to confusion, inciting fear and paralyzing the user due to a lack of guidance or panel intuition. Therefore, integration of the user interface with the fire protection system and materials is not an easy task and may hinder the growth of the Australia fire protection materials market.

• Low adoption rate among the potential end-users due to lack of awareness

However, the Australian population lacks in the basic areas of fire safety awareness, including the nature of fire, the causes of fire, the behavior of fire, and fire safety management. With the low awareness among the users of fire protection materials, people usually prefer cheap materials that do not provide protection from fire or are not suitable to contain the fire in case of any accidents. This is anticipated to be a challenging problem for the growth of the Australia fire protection market.

• High installation and maintenance cost

In addition, installing various fire protection systems adds up to the cost of the overall budget of a building. For example, installing an automatic water sprinkler system requires additional equipment, pipework, valve sets, booster pumps, and water storage, which are not pocket-friendly for all occupants or users. Moreover, the use of more heavy fire protection materials in a building also increases the load on the beam of the building, which negatively affects the building's load-bearing capacity, making it less stable over a longer time. Therefore, the disadvantage of the high costs of installation and maintenance of fire protection materials, products, and systems in a building will act as a challenge to the growth of the Australia fire protection market.

Recent Development

• In March 2022, PPG Industries, Inc. launched their new PPG AMERLOCK 600 multipurpose epoxy coating for applications requiring maximum versatility. This newly launched range of coatings are highly built, polyamide-cured coating that combines a broad application thickness range with fast dry times and a one-year recoat window.

Australia Fire Protection Materials Market Scope

Australia fire protection materials market is categorized based on product, types of fire, application, and end-use. The growth amongst these segments will help you analyze major industry growth segments and provide the users with a valuable market overview and market insights to make strategic decisions to identify core market applications.

Product

• Adhesive & Sealant
• Intumescent Coatings
• Sheets & Boards
• Putties
• Mortar
• Foam
• Fire Blocks
• Fire Safe Pipe Penetrations
• Preformed Devices
• Cementitious Spray
• Others

On the basis of product, Australia fire protection materials market is segmented into adhesive and sealant, intumescent coatings, sheets & boards, foam, putties, mortar, fire blocks, cementitious spray, preformed devices, fire safe pipe penetrations, others.

Types of Fires

• Cellulosic Fires
• Hydrogen Fires
• Jet Fires

On the basis of types of fires, Australia fire protection materials market is segmented into cellulosic fires, hydrogen fires, and jet fires.

Application

• Pipe
• Duct
• Structural Steel Fireproofing
• Cable & Wire Tray Fireproofing
• Doors
• Windows
• Glasses
• Others

On the basis of application, Australia fire protection materials market is segmented into pipe, duct, structural steel fireproofing, cable & wire tray fireproofing, doors, windows, glasses, others.

End-Use

• Commercial
• Infrastructure
• Institutional
• Residential

On the basis of end-use, the Australia fire protection materials market is segmented into residential, commercial, institutional, and infrastructure.

Competitive Landscape and Australia Fire Protection Materials Market Share Analysis

Australia fire protection materials market competitive landscape provides details by competitors. Details included are company overview, company financials, revenue generated, market potential, investment in research and development, new market initiatives, production sites and facilities, company strengths and weaknesses, product launch, product trials pipelines, product approvals, patents, product width and breadth, application dominance, technology lifeline curve. The above data points are only related to the companies' focus on the Australia fire protection materials market.

Some of the prominent players operating in the Australia fire protection materials market are 3M, BASF SE, PPG Industries, Inc., The Sherwin-Williams Company, Morgan Advanced Materials and its affiliates, Hilti Group, Tremco Incorporated, Unifrax, Tenmat, Sika Australia Pty Ltd, among others.

Research Methodology

데이터 수집 및 기준 연도 분석은 대규모 샘플 크기의 데이터 수집 모듈을 사용하여 수행됩니다. 시장 데이터는 시장 통계 및 일관된 모델을 사용하여 분석 및 추정됩니다. 또한 시장 점유율 분석 및 주요 추세 분석은 시장 보고서의 주요 성공 요인입니다. DBMR 연구팀에서 사용하는 주요 연구 방법론은 데이터 마이닝, 시장에 대한 데이터 변수의 영향 분석 및 기본(산업 전문가) 검증을 포함하는 데이터 삼각 측량입니다. 이 외에도 데이터 모델에는 공급업체 포지셔닝 그리드, 시장 타임라인 분석, 시장 개요 및 가이드, 회사 포지셔닝 그리드, 회사 시장 점유율 분석, 측정 표준, 호주 대 지역 및 공급업체 점유율 분석이 포함됩니다. 추가 문의 사항이 있는 경우 분석가에게 전화를 요청하십시오.

SKU-68320